DESCRIPTION 

The FireNET™ Plus 1127 series control panel is an analog addressable fire alarm panel with build options containing 1 or 2 SLC loops, a Digital Alarm Communicator/ Transmitter (DACT), and an RS-485 bus for network communication. Each SLC loop supports 127 devices of any combination (sensors or modules), and 127 analog sounder bases, for a possible total of 254 points per loop. Communication between devices is accomplished by use of standard cable (shielded or twisted pair is not required). Each panel includes a 4-amp power supply and has 2 onboard NAC circuits. The RS-485 bus provides communication to the panel network while another RS-485 bus provides communication for peripheral devices. The RS-232 interface allows the convenience of programming via a PC. The system will support a variety of Hochiki devices; photo, ion and heat sensors, which contain a unique, patented sensor design incorporating automatic drift compensation and day/night sensitivity modes. Additional devices include contact monitors, relay controllers, supervised auxiliary output and short circuit isolator modules. In addition, interfaces to conventional detection systems can be established by using a conventional zone monitoring module. The Loop Explorer Windows® Software interface provides the installer with fingertip access to installation programming and diagnostic tools. An Auto Learn feature offers the convenience for quick start applications. Add to this a reputation for high quality and dedicated service which makes this an exceptional product both in performance and value.

Analog design using Hochiki’s advanced DCP

• Protocol for fast communication
  
• Up to 127 sensors & modules, plus 127 analog sounder bases, for a total of 254 points possible per loop
  
• Uses standard wire, no-shielded or twisted pair required on SLC loops
  
• Integrated digital alarm communicator (DACT) with Contact ID and SIA reporting formats
  
• Programmable sensitivity levels by device
  
• Alarm Verification feature
  
• Automatic daily calibration & drift compensation routine
  
• Large 8-line x 40-character LCD display (320 char.)
  
• 1 or 2 loop (option)
  
• RS-485 bus for panel network (option)
  
• Built-in RS-232 interface for programming via a PC
  
• 3 on board programmable Form C relays rated at 1 amp at 30VDC
  
•  2 auxiliary power outputs, each rated 360mA at 24 VDC
  
• Loop Explorer Windows® configuration utility
  
• Auto-learn feature
  
• 500 network wide software zones
  
• Network Capability of up to 64 panels (option)
  
• Built in help and alarm information screens
  
• 2 on-board Class B (style Y) NAC circuits rated at 2.3 amps each (Special Application) and 1.6 amps each (Regulated continuous)
  
• Gentex, System Sensor, Wheelock, and Amseco NAC sync protocol built-in
  
• Automatic day/night sensitivity modes
  
• Fire Drill test function
  
• Walk Test function
  
• Powerful & versatile Cause & Effect wizard including:
  
• *Cause & Effect action
  
• *Disable function configuration
  
• *Test mode configuration
  
• Seismic Certified